LGA Type 1T1R

LGA Type 1T1R

LGA Type 1T1R

AP72312_16M_A

AI-native Connected MCU 1T1R 802.11 a/b/g/n/ac/ax/be Wi-Fi 7 + Bluetooth 6.0

Specification

Form factor LGA
IC Synaptics  SRW15XX
Dimension 35x23mm
Band 2.4GHz/5GHz/6GHz
Flash/RAM 16M/960K
Certification FCC/CE pre-scan
Wi-Fi spec Wi Fi 7 compliant. IEEE 802.11ax and 802.11be support
Su pports single spatial stream with PHY rate up to 114.7 Mbps.
Wi-Fi interface SDIO
Bluetooth spec Bluetooth® 6.0
Bluetooth interface UART
802.15.4(Matter over Thread) Support
Operating temperature -30 °C to 85 °C
Driver support Linux, Android, RTOS
DataSheet

Product Overview

The AMPAK Technology® AP72312_16M_A is a WLAN (Wi-Fi 7), Bluetooth (6.0), Thread and MCU combination chip with edge AI enabled. It is defined to support two modes of operation, independent master- and slave-mode. In slave mode, the host is the master which is responsible for AP72312_16M_A programming and to fulfill all the requirements for boot and guidance to control the operating modes and features. In master mode, AP72312_16M_A is independent and self-sufficient to boot and operate without any support from external host. The Ampak AP72312_16M_A smart AIoT device includes an integrated general purpose MCU ARM M52 200-MHz Helium DSP with U55 uNPU 50 GOPS @ 200 MHz, 2.4/5/6 GHz IEEE802.11 a/b/g/n/ac/ax/be MAC/baseband/radio and Bluetooth 6.0 and 802.15.4 Thread.

 

 
Capacity
Speed
Connection
Battery Life

For more information about our products please contact AMPAK sales.

Contact Us